Kapaċità ta' Kunsinna
| Kapaċità tal-bord riġidu | |
| Numru ta' saffi: | 1-42 saff |
| Materjal: | FR4 \ TG għoli FR4 \ Materjal mingħajr ċomb \ CEM1 \ CEM3 \ Aluminju \ qalba tal - metall \ PTFE \ Rogers |
| Ħxuna tas-saff ta 'barra Cu: | 1-6OZ |
| Ħxuna tas-saff ta 'ġewwa Cu: | 1-4OZ |
| Żona massima tal-ipproċessar: | 610 * 1100mm |
| Ħxuna minima tal-bord: | 2 saffi 0.3mm (12mil) 4 saffi 0.4mm (16mil) 6 saffi 0.8mm (32mil) 8 saffi 1.0mm (40mil) 10 saffi 1.1mm (44mil) 12-il saff 1.3mm (52mil) 14-il saff 1.5mm (59mil) 16-il saff 1.6mm (63mil) |
| Wisa' Minimu: | 0.076mm (3mil) |
| Spazju Minimu: | 0.076mm (3mil) |
| Daqs minimu tat-toqba (toqba finali): | 0.2mm |
| Proporzjon tal-aspett: | 10:1 |
| Daqs tat-toqba tat-tħaffir: | 0.2-0.65mm |
| Tolleranza tat-tħaffir: | +\-0.05mm (2mil) |
| Tolleranza PTH: | Φ0.2-1.6mm +\-0.075mm (3mil) Φ1.6-6.3mm+\-0.1mm(4mil) |
| Tolleranza NPTH: | Φ0.2-1.6mm +\-0.05mm (2mil) Φ1.6-6.3mm+\-0.05mm(2mil) |
| Finish board tolleranza: | Ħxuna <0.8mm, Tolleranza: +/-0.08mm |
| 0.8mm≤Thickness≤6.5mm, Tolleranza +/-10% | |
| Pont minimu tal-maskra tal-istann: | 0.076mm (3mil) |
| Tidwir u liwi: | ≤0.75% Min0.5% |
| Raneg ta' TG: | 130-215℃ |
| Tolleranza ta' impedenza: | +/-10%, Min +/-5% |
| Trattament tal-wiċċ:
| HASL, LF HASL |
| Immersjoni Deheb, Deheb Flash, Saba 'Deheb | |
| Fidda Immersjoni, Landa Immersjoni, OSP | |
| Kisi selettiv tad-deheb, ħxuna tad-deheb sa 3um (120u") | |
| Stampa tal-Karbonju, S/M li jitqaxxar, ENEPIG | |
| Kapaċità tal-bord tal-aluminju | |
| Numru ta' saffi: | Saff wieħed, saffi doppji |
| Daqs massimu tal-bord: | 1500 * 600mm |
| Ħxuna tal-bord: | 0.5-3.0mm |
| Ħxuna tar-ram: | 0.5-4oz |
| Daqs minimu tat-toqba: | 0.8mm |
| Wisa 'minimu: | 0.1mm |
| Spazju minimu: | 0.12mm |
| Daqs minimu tal-kuxxinett: | 10 mikron |
| Finitura tal-wiċċ: | HASL, OSP, ENIG |
| Iffurmar: | CNC, Punching, V-cut |
| Tagħmir: | Tester Universali |
| Flying Probe Open/Short Tester | |
| Mikroskopju ta 'qawwa għolja | |
| Kit għall-Ittestjar tas-Saldabbiltà | |
| Qaxxar tat-test tal-Qawwa | |
| High Volt Open & Short tester | |
| Cross Section Molding Kit Bil Polisher | |
| Kapaċità FPC | |
| Saffi: | 1-8 saffi |
| Ħxuna tal-bord: | 0.05-0.5mm |
| Ħxuna tar-ram: | 0.5-3OZ |
| Wisa' Minimu: | 0.075mm |
| Spazju minimu: | 0.075mm |
| Daqs tat-toqba minn ġo: | 0.2mm |
| Daqs minimu tat-toqba tal-lejżer: | 0.075mm |
| Daqs minimu tat-toqba tal-ippanċjar: | 0.5mm |
| Tolleranza tal-maskra tal-istann: | +\-0.5mm |
| Tolleranza minima tad-dimensjoni tar-rotta: | +\-0.5mm |
| Finitura tal-wiċċ: | HASL, LF HASL, Fidda Immersjoni, Deheb Immersjoni, Deheb Flash, OSP |
| Iffurmar: | Punching, Laser, Qtugħ |
| Tagħmir: | Tester Universali |
| Flying Probe Open/Short Tester | |
| Mikroskopju ta 'qawwa għolja | |
| Kit għall-Ittestjar tas-Saldabbiltà | |
| Qaxxar tat-test tal-Qawwa | |
| High Volt Open & Short tester | |
| Cross Section Molding Kit Bil Polisher | |
| Kapaċità riġida u flex | |
| Saffi: | 1-28 saff |
| Tip ta' materjal: | FR-4 (Tg Għoli, Ħieles Aloġenu, Frekwenza Għolja) PTFE, BT, Getek, bażi tal-aluminju，Bażi tar-ram，KB, Nanya, Shengyi, ITEQ, ILM, Isola, Nelco, Rogers, Arlon |
| Ħxuna tal-bord: | 6-240mil/0.15-6.0mm |
| Ħxuna tar-ram: | 210um (6oz) għal saff ta 'ġewwa 210um (6oz) għal saff ta' barra |
| Daqs minimu tat-trapan mekkaniku: | 0.2mm/0.08” |
| Proporzjon tal-aspett: | 2:1 |
| Daqs massimu tal-pannell: | Sigle naħa jew naħat doppji: 500mm * 1200mm |
| Saffi b'ħafna saffi: 508mm X 610mm (20″ X 24″) | |
| Wisa 'minn tal-linja/spazju: | 0.076mm / 0.076mm (0.003″ / 0.003″)/ 3mil/3mil |
| Permezz tat-tip ta' toqba: | Għomja / Midfun / Ipplaggjat (VOP, VIP...) |
| HDI / Microvia: | IVA |
| Finitura tal-wiċċ: | HASL, LF HASL |
| Immersjoni Deheb, Deheb Flash, Saba 'Deheb | |
| Fidda Immersjoni, Landa Immersjoni, OSP | |
| Kisi selettiv tad-deheb, ħxuna tad-deheb sa 3um (120u") | |
| Stampa tal-Karbonju, S/M li jitqaxxar, ENEPIG | |
| Iffurmar: | CNC, Punching, V-cut |
| Tagħmir: | Tester Universali |
| Flying Probe Open/Short Tester | |
| Mikroskopju ta 'qawwa għolja | |
| Kit għall-Ittestjar tas-Saldabbiltà | |
| Qaxxar tat-test tal-Qawwa | |
| High Volt Open & Short tester | |
| Cross Section Molding Kit Bil Polisher | |
